Parking System--Bottom plate of stereo garage roll forming machine
1) Number of forming steps: 17 steps
2) Material of shaft: 45# steel hardening and tempering treatment.
Outer diameter 85mm ,total solid
3) Rollers: Material is high grade No.45 forged steel, with
digital-controlled procession. The rollers are plated with hard
chrome with thickness of 0.05mm on the surface after being machined
by the exact machine tool. So that to ensure long life of forming
4) Main motor power: 4 KW with cyclical planetary gear speed
5) The plating chromium’s thickness on the surface of rollers:
6) Main stand: 350# H steel welded structure Wall plate thickness:
14mm the main frame of machine is welded separately and the outside
wall is connected by screw after being rot blasted on the surface.
7) Chain and gear move the line, motor drives. All working actions
are controlled by PLC electric cabinet automatically.
8) Suitable power voltage: 380V/50HZ/3Phase (can de designed
according to buyer’s requirement)
9) Line working speed (Forming speed): about 15-18 m/min (without
10) Main machine motor power: about 5.5 KW (Depend on final design)
Dimension of the machine: 9000mmx1200mmx1200mm
Weight of the machine: about 5000kg
It's combined with roll forming,punching,cutting and other
The equipment is consisted of decoiler,roll
forming,punching,cutting and electrical system and so on.
|Raw material||Type||MS,galvanized sheet|
|Strength of panel||Map||≥350|
|Thickness of panel||mm||2.0~2.5||Customized|
|2||Size||mm||See the drawing||Customized|
|4||Material of roller||GCr15Hardening treatment|
|5||Drive type||Gear box|
|6||Total power||kw||About 30kw|
|7||Electrical system||PLC Inverter control|